Download Operating Instructions here

When unpacking you will find two components:

1) the SNORESTOPPER,

2) the electrical plug & lead.

Plug the electrical lead into the back of the SNORESTOPPER.

Place the SNORESTOPPER at the "snorer's" side of the bed, we recommend you place

the SNORESTOPPER between 24 and 36 inches / 50cm to 100cm, away from "snorer",

the front of the SNORESTOPPER should be facing the snorer.

Plug the SNORESTOPPERs electrical lead into the wall socket.

Switch on the SNORESTOPPER with the switch on the back of the unit. Please note the

top position is off. The middle and bottom positions are both on. Both on positions work

identically.

The SNORESTOPPER will go through a start up cycle, this will confirm the

SNORESTOPPER is ready for use.

The SNORESTOPPER uses a library of recorded snores. Initially the SNORESTOPPER

will need to scroll through the library until it recognises your snore. This may take some

time and require several snores at regular intervals during the first few nights of sleep.

Once the SNORESTOPPER is trained it will recognise your snore almost immediately.

It is recommended you turn the SNORESTOPPER off when not in use. Everyday sounds

can be very similar to some snores and may cause the unit to trigger when not sleeping.

Due to health & hygiene considerations, SNORESTOPPER does not have a returns policy.

Unfortunately the goods can not be returned unless they are faulty or delivered damaged.

Friendbest Ltd

www.snore-stopper.com